We asked you about a machine that can comfortably use iRIC Software's XNUMXD hydraulic analysis software.
Currently, we are using a configuration equipped with Xeon W-2125, but since it takes time to process, we need a machine that specializes in analysis as much as possible.
In addition, since 3D CAD may be used, we would like to make a proposal based on the support for that.
In our proposal, we have prepared specifications assuming that the software you are using supports multi-core calculation.Since there are multiple solvers for the relevant software, we recommend that you check with the software manufacturer in advance about the support of the solver you are using.
In addition, we are considering the configuration with the idea of improving the speed by parallel processing with multiple cores, but depending on the calculation, even if the number of cores is too large, the processing capacity will peak, or parallel processing with multiple cores. It may not support processing.Compared to the CPU of the existing machine, the performance is improved in terms of generation and efficiency, so it is expected that the speed will be improved, but if the multi-core efficiency is poor or not supported, it will be dramatic. Please note that it may be difficult to improve the speed.
Regarding 3D CAD, it is A2000, which is a standard grade product for workstations.If the model to be handled has complicated contents, the upper A4000 etc. will be in view.We would appreciate it if you could consider the balance between actual processing and cost.
【Main Specifications】
| CPU | Ryzen9 5950X (3.40GHz 16 cores) |
| memory | 64GB |
| storage | 1TB M.2 SSD |
| Video | Nvidia RTX A2000 |
| network | on board (10/100 / 1000Base-T x1) |
| Housing + power supply | Middle tower case + 850W |
| OS | Windows 10 Professional 64bit |
|
■ Click here for details and inquiries about this PC case |
