A customer involved in electrostatic technology research who saw Case No. PC-10741 consulted us about introducing a workstation for COMSOL Multiphysics. […see next]
A customer who saw Case No. PC-9133B2 asked us about a PC for numerical analysis research in metal additive manufacturing technology.Discrete Element Method (DEM) and numbers […see next]
A customer involved in the research and development of automotive technology consulted us about replacing workstations.The application is a thermal fluid simulation, and the number of cores is as large as possible. […see next]
A customer inquired about a PC for the purpose of simulating metal processing.Your requirements are as follows.・CPU: Emphasis on number of clocks Long calculation is assumed […see next]
A customer involved in research on construction technology consulted us about a machine for FEM analysis.The conditions for consideration are as follows.・Using Nastran as the solver, Pripos […see next]
■This article was posted on November 21, 2022, so the information may be out of date. A customer involved in pump development requested a water flow for the development of a centrifugal pump. […see next]
■This article was posted on August 30, 2022, so the information may be out of date. A customer inquired about a CFD simulation machine to be used in their graduation research. […see next]
■This article was posted on November 2021, 11, so the information may be out of date. A customer requested a Xeon 5 cores or more (preferred) for a machine for CFD analysis. […see next]
■This article was posted on July 2020, 7, so the information may be outdated. Proposal example published in Tegusys “PC-7 – Multiphysics” […see next]
■This article was posted on January 2019, 1, so the information may be out of date.From the customer, the software used STAR-CCM+ (part […see next]
Copyright © 2020 | Tegara Corporation