A customer involved in the research and development of electrical components contacted us for a PC to perform electromagnetic field analysis and thermal fluid analysis. The budget was about 100 to 150 million yen, and the customer was looking for a PC that would use Femtet. […see next]
A customer involved in food R&D asked us to install a workstation that runs Ansys Fluent as fast as possible.My NVIDIA Quad […see next]
A customer viewing the PC-9870 asked us about a workstation for thermo-fluid analysis.Specifically, the question is whether the following configuration is feasible. […see next]
A customer involved in the research and development of automotive technology consulted us about replacing workstations.The application is a thermal fluid simulation, and the number of cores is as large as possible. […see next]
A customer inquired about a CFD simulation machine for graduation research.General PC makers end up over-spec where they don't need it. […see next]
■This article was posted on September 2020, 9, so the information may be outdated. Machine for performing thermal fluid analysis using ProCAST and OpenFOAM […see next]
■This article was posted on July 2020, 7, so the information may be outdated. Proposal example published in Tegusys “PC-7 – Multiphysics” […see next]
■ This is an article posted on September 2018, 9, so the information may be out of date.From the customer, a dedicated machine for thermo-fluid analysis by Ansys Fluent […see next]
■ This is an article posted on May 2018, 5, so the information may be out of date.From the customer, for general-purpose thermo-fluid analysis software ANSYS Fluent 30 […see next]
■ This article was posted on December 2016, 12, so the information content may be out of date. We received a consultation from a customer about making a machine for thermal fluid analysis. Sof used […see next]
Copyright © 2020 | Tegara Corporation