3D scanner `` eFit Scanner '' that creates a model of the outer ear

3D scanner that creates a model of the outer ear on Unipos website eFit Scanner Page has been added.

eFit Scanner Is a handy scanner set for creating 3D models of the outer ear. With three types of laser scanning modes, it is possible to perform 3D scanning with high accuracy of about one error hair (+/- 90 μm) in about 1 seconds per ear. The scanner body, measurement headset, dedicated notebook PC, ear model for training, etc. are delivered in a carry case.

[EFit Scanner specifications]

Sensor: 3 CMOS Digital Image Sensors
Frame rate: 15 frames / sec
Input: 5V USB 3.0, Max. 900mA each
USB plug: USB 3.0, Type A
Output signal: USB 3.0
EMC standard: EN 55011, EN 61000-3-2, EN 6100-3-3
Class 2 Laser Product: EN 60825
LED Photobiological Safety: EN 62471
Storage Temperature: -20 ° C to + 60 ° C (-4 ° F to + 140 ° F)
Operating environment temperature: + 10 ° C to + 30 ° C (+ 50 ° F to + 86 ° F)
Temperature: 30% to 75%, non-condensing
Barometric pressure: 600 hPa to 1060 hPa
Accuracy: 90μ Volumetric Accuracy (0.09mm)